Honda Accord: Tire and Loading Information Label
The label attached to the driver’s doorjamb provides necessary tire and loading information.
The tire and loading information label attached to the driver’s doorjamb contains:
1 The number of people your vehicle can carry.
2 The total weight your vehicle can carry. Do not
exceed this weight.
3 The original tire sizes for front, rear, and spare.
4 The proper cold tire pressure for front, rear, and
spare.
Checking Tires
To safely operate your vehicle, your tires must be of the proper type and
size, in
good condition with adequate tread, and properly inflated.
• Inflation guidelines
Properly inflated tires pro ...
Tire Labeling
The tires that came on your vehicle have a
number of markings. Those you should be
aware of are described below.
• Tire Sizes
Whenever tires are replaced, they should be replaced with tires ...
See also:
Fuel Pressure Regulator Replacement
1. Remove the fuel tank unit (see page 11-320).
2. Remove the reservoir (A).
3. Remove the bracket (B).
4. Remove the fuel pressure regulator (C).
5. Install the parts in the reverse order ...
Change Lever Assembly Disassembly/Reassembly
NOTE: Prior to reassembling, clean all the parts in solvent, dry them, and
apply grease to contact surfaces as shown. Do
not wash the rubber parts with solvent.
...
Ignition Timing Inspection
1. Connect the Honda Diagnostic System (HDS) to the
data link connector (DLC) (see step 2 on page 11-3).
2. Turn the ignition switch to ON (II).
3. Make sure the HDS communicates with the vehic ...