Heating and Cooling

Using Vents, Heating and A/C • Heating The heater uses engine coolant to warm the air. 1. Adjust the fan speed using the fan control dial. 2. Select . 3. Adjust the temperature using ...

Using Automatic Climate Control

The automatic climate control system maintains the interior temperature you select. The system also selects the proper mix of heated or cooled air that will as quickly as possible, raise or l ...

See also:

Balancer Shaft Inspection
1. Seat the balancer shaft by pushing it away from the oil pump sprocket end of the oil pump. 2. Zero the dial indicator against the end of the balancer shaft, then push the balancer shaft back a ...

Symptom Troubleshooting
VSA activation indicator does not go off, and no DTCs are stored NOTE: If the VSA modulator was replaced prior to the activation indicator turning on, do the VSA sensor neutral position memorizati ...

Ignition Key Light Test
1. Remove the steering column upper and lower covers (see page 20-181). 2. Disconnect the 6P connector (A). 3. The LED should come on when power is connected to terminal No. 6 and ground is co ...