Trunk Lid Latch Replacement

Special Tools Required KTC Trim Too! Set SOJATP2014* *Available through the Honda Tool and Equipment Program; call 888-424-6857 NOTE: - Put on gloves to protect your hands. - Take care not t ...

Frame Brace Replacement

Strut Brace Replacement 1. Remove the cowl cover (see page 20-278). 2. Disconnect the brake booster vacuum hose (A) from the strut brace (B). 3. Remove the nuts from the top of the damper, and ...

See also:

Synchro Sleeve and Hub Inspection and Reassembly
1. Inspect the gear teeth on all synchro hubs and synchro sleeves for wear (rounded off corners). 2. Install each synchro hub (A) in its mating synchro sleeve (B), and check for free movement. Ma ...

Component Location index
...

Oil Pressure Test
NOTE: If the low oil pressure warning indicator stays on with the engine running, check the engine oil level. If the oil level is correct, do the following test. 1. With the engine stopped, remov ...