Honda Accord: Steering Linkage and Gearbox Inspection
Eighth generation (2008–2012) / Honda Accord MK8 2008-2012 Service Manual / Steering / Steering / Steering Linkage and Gearbox Inspection
Power Assist Check
tires and wheels at the correct tire pressure. 1. Check the power steering fluid level (see page 17-28). 2. Start the engine, let it idle, and turn the steering wheel from lock to lock several ...Steering Wheel Removal
SRS components are located in this area. Review the SRS component locations: 4-door {see page 24-21), 2-door (see page 24-23) and the precautions and procedures (see page 24-25) before doing repair ...See also:
Cam Chain Installation
Special Tools Required
Camshaft Lock Pin Set 07AAB-RWCA120
NOTE:
- Keep the cam chain away from magnetic fields.
- Before doing this procedure, check that the variable
valve timing control (VTC ...
Wheel Bearing End Play Inspection
1. Raise and support the vehicle (see page 1-13).
2. Remove the wheels.
3 . Install suitable flat washers (A) and the wheel nuts.
Tighten the nuts to the specified torque to hold the
brake d ...
Transmission Range Switch Test
1. Raise the vehicle on a lift, or apply the parking brake,
block the rear wheels, and raise the front of the
. vehicle. Make sure it is securely supported.
2. Remove the left front wheel.
3. ...