Honda Accord: Openers
- Component Location Index
- Hood Opener Cable Replacement
- Trunk Lid Opener Cable/Fuel Fill Door Opener Cable Replacement
- Hood Latch Replacement
- Hood Release Handle Replacement
- Trunk Lid Opener/Fuel Fill Door Opener Replacement
- Trunk Lid Latch Replacement
Rear Air Outlet Replacement
NOTE: Take care not to scratch the body.
1_ Remove the rear bumper (see page 20-260).
2. Release the hooks (A), then remove the rear air outlet
(B).
3. Install the air outlet by pushing on t ...
See also:
Motor Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the headliner (see page 20-140).
2. Disconnect the connector (A), and remove the screws,
then remove the motor (B).
3. Install the motor ...
Oil Pressure Switch Replacement
1. Disconnect the oil pressure switch connector (A), then
remove the oil pressure switch (B).
2. Remove any old liquid gasket from the switch and
switch mounting hole.
3. Apply a very small am ...
Brake Pedal Position Switch Test
1. Disconnect the 4P connector (A) from the brake pedal
position switch (B).
2. Check for continuity between terminals No. 1 and No.
2.
• There should be continuity when the brake pedal ...